MALIBU DAVE'S
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder unless you want to reflare your stock lines with 3/8-24 inverted flare brake line fittings. ***If eliminating the ABS and DO NOT need a prop valve.***
These master cylinders will have 3/8-24 inverted flare outlets. If running new lines, use 3/16" diameter line with 3/8-24 inverted flare fittings.
For use with a stock OBS 1999-2002 vacuum boosted master cylinders
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1-1/32" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$169.00 Part# OBS2K103Y
___________________________________
___________________________________
2X
These master cylinders will have 3/8-24 inverted flare outlets. If running new lines, use 3/16" diameter line with 3/8-24 inverted flare fittings.
$99.99 Part# OBS2PKGW1
___________________________________
15/16" Bore Master Cylinder Applications
Front Stock Light Duty Disc Brakes*
- Rear Stock Explorer Caliper Disc Brake Conversion Kit
- Rear Stock GM, Factory Calipers (NON-Metric) Disc Brake Conversion Kit
- Rear Wilwood Disc Brake Conversion Kit - 1.38" 4 piston diameter or smaller
- Rear C5/C6/C7 Corvette Disc Brake Conversion Kit
- Rear LS1 Camaro/Firebird Disc Brake Conversion Kit
- Rear Gen5/Gen6 Camaro Disc Brake Conversion Kit
Front C5 Caliper ProPerformance Front KIT
- Rear Stock Explorer Caliper Disc Brake Conversion Kit
- Rear Stock GM, Factory Calipers (NON-Metric) Disc Brake Conversion Kit
- Rear Wilwood Disc Brake Conversion Kit - 1.38" 4 piston diameter or smaller
- Rear C5/C6/C7 Corvette Disc Brake Conversion Kit
- Rear LS1 Camaro/Firebird Disc Brake Conversion Kit
- Rear Gen5/Gen6 Camaro Disc Brake Conversion Kit
Front Wilwood 6 Piston OBS Front KIT
- Rear Stock Explorer Caliper Disc Brake Conversion Kit
- Rear Stock GM, Factory Calipers (NON-Metric) Disc Brake Conversion Kit
- Rear Wilwood Disc Brake Conversion Kit - 1.38" 4 piston diameter or smaller
- Rear C5/C6/C7 Corvette Disc Brake Conversion Kit
- Rear LS1 Camaro/Firebird Disc Brake Conversion Kit
- Rear Gen5/Gen6 Camaro Disc Brake Conversion Kit
Front Caliper with a Piston area of 4.9 sq.in. or smaller
- Rear Caliper with a Piston area of 3.14 sq.in. or smaller
*NOTE: The Stock, Light Duty brakes will have a 1.0" wide rotor and a caliper with a 2.0" piston diameter. If you have a 1.0" wide rotor, you have the Light Duty Setup.
If you have a 1994 and up OBS Chevy Truck, you should not have light duty brakes.
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder. This is the KIT you need if you want an adjustable prop valve. ***If eliminating the ABS and need a prop valve.***
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-7/8" Bore
-MANUALBRAKES.com Conversion Package
-NO Brake Line Adapters
-NO Adj Prop Valve
$159.00 Part# OBS2K78X
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-15/16" Bore
-MANUALBRAKES.com Conversion Package
-NO Brake Line Adapters
-WITH Adj Prop Valve & 2 SS Lines
$269.00 Part# OBS2K1516Z
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1-1/32" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$159.00 Part# OBS2K103X
___________________________________
NOTE: This KIT uses your stock brake lines(if long enough) that came out of the stock master cylinder. ***Easiest to install if using your stock brake lines.*** No additional parts are needed for the installation.
Unsure? Call or Text
with any questions.
832-264-5566
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder unless you want to reflare your stock lines with 3/8-24 inverted flare brake line fittings. ***If eliminating the ABS and DO NOT need a prop valve.***
___________________________________
For use with a 7/8" or 15/16" Wilwood Master Cylinders
Unsure? Call or Text
with any questions.
832-264-5566
1.0" Bore Master Cylinder Applications
Front Stock Light Duty Disc Brakes*
- Rear Stock GM, Front Metric (D154) Caliper on rear
- Rear Wilwood Disc Brake Conversion Kit - 1.75" 4 piston diameter or larger
Front Stock Heavy Duty Disc Brakes**
- Rear Stock or Aftermarket Drum
Front C5 Caliper ProPerformance Front KIT
- Rear Stock GM, Front Metric (D154) Caliper on rear
- Rear Wilwood Disc Brake Conversion Kit - 1.75" 4 piston diameter or larger
Front Wilwood Disc Brake Conversion Kit
- Stock GM, Front Metric (D154) Caliper on rear
- Rear Wilwood Disc Brake Conversion Kit - 1.75" 4 piston diameter or larger
Front TBM/Strange/Aerospace Disc Brake Conversion Kit
- Rear Stock or Aftermarket Drum
- Rear Stock Explorer Caliper Disc Brake Conversion Kit
- Rear Stock GM, Factory Calipers (NON-Metric) Disc Brake Conversion Kit
- Rear Wilwood Disc Brake Conversion Kit - 1.38" 4 piston diameter or smaller
- Rear C4/C5/C6/C7 Corvette Disc Brake Conversion Kit
- Rear LS1 Camaro/Firebird Disc Brake Conversion Kit
- Rear Gen5/Gen6 Camaro Disc Brake Conversion Kit
*NOTE: The Stock, Light Duty brakes will have a 1.0" wide rotor and a caliper with a 2.0" piston diameter. If you have a 1.0" wide rotor, you have the Light Duty Setup.
If you have a 1994 and up OBS Chevy Truck, you should not have light duty brakes.
**NOTE: The Stock, Heavy Duty brakes will have a 1.25" wide rotor and a caliper with a 3" piston diameter. If you have a 1.25" wide rotor, you have the Heavy Duty Setup.
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1-1/32" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-WITH Adj Prop Valve & 2 SS Lines
$269.00 Part# OBS2K103Z
Unsure? Call or Text
with any questions.
832-264-5566
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1.0" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$169.00 Part# OBS2K10Y
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder. This is the KIT you need if you want an adjustable prop valve. ***If eliminating the ABS and need a prop valve.***
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-15/16" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$169.00 Part# OBS2K1516Y
$99.99 Part# OBS2PKGW2
1-1/8" Bore Master Cylinder Applications
Front Stock Heavy Duty Disc Brakes*
- Rear TBM/Strange/Aerospace Disc Brake Conversion Kit
Front Stock Heavy Duty Disc Brakes*
- Rear Disc Conversion using GM Metric Calipers
Front TBM/Strange/Aerospace Disc Brake Conversion Kit
- Rear TBM/Strange/Aerospace Disc Brake Conversion Kit
*NOTE: The Stock, Light Duty brakes will have a 1.0" wide rotor and a caliper with a 2.0" piston diameter. If you have a 1.0" wide rotor, you have the Light Duty Setup.
If you have a 1994 and up OBS Chevy Truck, you should not have light duty brakes.
**NOTE: The Stock, Heavy Duty brakes will have a 1.25" wide rotor and a caliper with a 3" piston diameter. If you have a 1.25" wide rotor, you have the Heavy Duty Setup.
For any questions, please email me at david.schultz@manualbrakes.com or call me at 832-264-5566
Chevrolet Silverado (1994-1998)
Chevrolet Suburban (1994-1999)
Chevrolet Tahoe (1994-1999)
GMC Sierra (1994-1998)
GMC Suburban (1994-1999)
GMC Yukon (1994–1999)
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder unless you want to reflare your stock lines with 3/8-24 inverted flare brake line fittings. ***If eliminating the ABS and DO NOT need a prop valve.***
___________________________________
For use with a 1.0" or 1.125" Wilwood Master Cylinders
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-7/8" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$169.00 Part# OBS2K78Y
2X
These master cylinders will have 3/8-24 inverted flare outlets. If running new lines, use 3/16" diameter line with 3/8-24 inverted flare fittings.
For use with Strange/MOPAR Style master cylinders
These master cylinders will have 3/8-24 inverted flare outlets. If running new lines, use 3/16" diameter line with 3/8-24 inverted flare fittings.
NOTE: This KIT uses your stock brake lines(if long enough) that came out of the stock master cylinder. ***Easiest to install if using your stock brake lines.*** No additional parts are needed for the installation.
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1.0" Bore
-MANUALBRAKES.com Conversion Package
-NO Brake Line Adapters
-WITH Adj Prop Valve & 2 SS Lines
$269.99 Part# OBS2K10Z
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1-1/8" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-WITH Adj Prop Valve & 2 SS Lines
$269.00 Part# OBS2K112Z
NOTE: This KIT uses your stock brake lines(if long enough) that came out of the stock master cylinder. ***Easiest to install if using your stock brake lines.*** No additional parts are needed for the installation.
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder unless you want to reflare your stock lines with 3/8-24 inverted flare brake line fittings. ***If eliminating the ABS and DO NOT need a prop valve.***
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1-1/8" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$159.00 Part# OBS2K112X
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder unless you want to reflare your stock lines with 3/8-24 inverted flare brake line fittings. ***If eliminating the ABS and DO NOT need a prop valve.***
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder. This is the KIT you need if you want an adjustable prop valve. ***If eliminating the ABS and need a prop valve.***
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-15/16" Bore
-MANUALBRAKES.com Conversion Package
-NO Brake Line Adapters
-NO Adj Prop Valve
$159.00 Part# OBS2K1516X
1-1/32" Bore Master Cylinder Applications
Front Stock Light Duty Disc Brakes*
- Rear TBM/Strange/Aerospace Disc Brake Conversion Kit
Front TBM/Strange/Aerospace Disc Brake Conversion Kit
- Rear Stock GM, Front Metric (D154) Caliper on rear
- Rear Wilwood Disc Brake Conversion Kit - 1.75" 4 piston diameter or larger
*NOTE: The Stock, Light Duty brakes will have a 1.0" wide rotor and a caliper with a 2.0" piston diameter. If you have a 1.0" wide rotor, you have the Light Duty Setup.
If you have a 1994 and up OBS Chevy Truck, you should not have light duty brakes.
**NOTE: The Stock, Heavy Duty brakes will have a 1.25" wide rotor and a caliper with a 3" piston diameter. If you have a 1.25" wide rotor, you have the Heavy Duty Setup.
___________________________________
___________________________________
2X
$99.99 Part# OBS2KGGM1
***BONUS: THESE KITS ARE DESIGNED TO USE YOUR STOCK BRAKE LIGHT SWITCH. UNLIKE EARLIER GM BRAKE LIGHT SWITCHES, THE BRAKE LIGHT SWITCHES ON THE 2ND GEN S-10s ARE INTEGRATED ONTO THE VACUUM BOOSTER PUSH ROD THAT ATTACHES TO THE BRAKE PEDAL ARM. THESE KITS ARE DESIGNED TO USE THE STOCK BRAKE LIGHT SWITCH WITH NO ADDITIONAL WIRING OR MODIFICATIONS AT NO ADDITIONAL COSTS.***
*** 1994-1998 OBS Silverado/Sierra/ Suburban Manual Brake Conversion PACKAGE ***
NOTE: This KIT uses your stock brake lines(if long enough) that came out of the stock master cylinder. ***Easiest to install if using your stock brake lines.*** No additional parts are needed for the installation.
1919 West Sam Houston Parkway North
Houston, TX 77043
The Manual Brake Conversion Package does not come with a master cylinder. NOTE: If you don't see your master cylinder listed below, please call to determine if we can put together a conversion for you.
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-7/8" Bore
-MANUALBRAKES.com Conversion Package
-NO Brake Line Adapters
-WITH Adj Prop Valve & 2 SS Lines
$269.00 Part# OBS2K78Z
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1-1/8" Bore
-MANUALBRAKES.com Conversion Package
-WITH Brake Line Adapters
-NO Adj Prop Valve
$169.00 Part# OBS2K112Y
Unsure? Call or Text
with any questions.
832-264-5566
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder. This is the KIT you need if you want an adjustable prop valve. ***If eliminating the ABS and need a prop valve.***
These master cylinders will have 3/8-24 inverted flare outlets. If running new lines, use 3/16" diameter line with 3/8-24 inverted flare fittings.
NOTE: This KIT does NOT use your stock brake lines that came out of the stock master cylinder. This is the KIT you need if you want an adjustable prop valve. ***If eliminating the ABS and need a prop valve.***
7/8" Bore Master Cylinder Applications
Front Stock Light Duty Disc Brakes*
- Rear Stock or Aftermarket Drum
Front C5 Caliper ProPerformance Front KIT
- Rear Stock or Aftermarket Drum
Front Wilwood 6 Piston OBS Front KIT
- Rear Stock or Aftermarket Drum
Front Caliper with a Piston area of 4.9 sq.in. or smaller
- Rear Stock or Aftermarket Drum
*NOTE: The Stock, Light Duty brakes will have a 1.0" wide rotor and a caliper with a 2.0" piston diameter. If you have a 1.0" wide rotor, you have the Light Duty Setup.
If you have a 1994 and up OBS Chevy Truck, you should not have light duty brakes.
2X
Unsure? Call or Text
with any questions.
832-264-5566
___________________________________
$99.99 Part# OBS2PKGMOPAR
1988-1994 OBS Chevy Truck
MANUAL BRAKE KIT
-MOPAR/Strange Style MC
-1.0" Bore
-MANUALBRAKES.com Conversion Package
-NO Brake Line Adapters
-NO Adj Prop Valve
$159.00 Part# OBS2K10X
*** 1994-1998 OBS Silverado/Sierra/Suburban Manual Brake Conversion KITs ***
***CHOOSE YOUR KIT BELOW BASED ON YOUR FRONT AND REAR BRAKE SETUP***
Each KIT below comes with a master cylinder that matches the bore size to your front and rear brake setup. Matching the correct bore size to your front and rear brake setup gives the appropriate amount of volume on the first pedal stroke and the maximum amount a line pressure with the least amount of pedal effort.
Please contact use if your front and rear brake combination is not represented below so we can suggest a KIT that will perform best with the brake setup you have.
Phone or Text: 832-264-5566
Email: david.schultz@manualbrakes.com
2X
We ship to Canada. Additional shipping charges will apply.
Please email to request a shipping quote.
NOTE: This KIT uses your stock brake lines(if long enough) that came out of the stock master cylinder. ***Easiest to install if using your stock brake lines.*** No additional parts are needed for the installation.
94-97 S-10 Manual Brake Conversion Kit s10 manual brakes